Pit Boss 1150 PRO Series User Manual Download Page 6

Page: 6 / 34

ENGLISH

PARTS & SPECS

Part# Description

Porcelain-Coated Steel Upper Cooking Rack (x1)

Porcelain-Coated Cast-Iron Cooking Grid (x4)

Lid Stopper (x1)

Flame Broiler Slider (x1)

Flame Broiler Main Plate (x1)

Chimney Cap (x1)

Chimney Stack (x1)

Chimney Gasket (x1)

Main Barrel / Hopper Assembly (x1)

Lid Handle Bezel (x2)

Lid Handle (x1)

Flame Broiler Adjusting Bar Handle (x1)

Flame Broiler Adjusting Bar (x1)

Meat Probe (x2)

Grease Bucket (x1)

Side Shelf (x1)

Diffuser Plate (x1)

Front Shelf Bracket / Left (x1)

Front Shelf Bracket / Right (x1)

Front Shelf (x1)

Left Support Leg - Front (x1)

Left Support Leg - Back (x1)

Right Support Leg - Front (x1)

Right Support Leg - Back (x1)

Bottom Shelf (x1)

Locking Caster Wheels (x2)

Wheel (x2)

Screw (x28)

Washer (x24)

Locking Washer (x22)

Tool Hook (x3)

Wheel Cotter Pin (x2)

Wheel Washer (x2)

Wheel Axle Pin (x2)

Screw (x2)

Nut (x2)

Bushing (x2)

MODEL

ASSEMBLED (WxDxH)

WEIGHT

COOKING AREA

TEMPERATURE RANGE

PB1150PS2

1,587.5 MM x 813.5 MM x 1,334 MM

62.50 IN. x 32.03 IN. x 52.52 IN.

85.6 KG / 188.7 LB

MAIN - 4,587.08 CM² / 711.0 IN²

UPPER RACK - 2,864.51 CM² / 444.0 IN²

TOTAL - 7,451.59 CM² / 1,155.0 IN²

82-260°C / 180-500°F

NOTE: Due to ongoing product development, parts are subject to change without notice. Contact

Customer Service if parts are missing when assembling the unit.

PB – ELECTRIC REQUIREMENTS

110-120V, 60HZ, 250W, 3-PRONG GROUNDED PLUG

Summary of Contents for 1150 PRO Series



































Search results

Summary of Contents for 1150 PRO Series

Reviews:

Related manuals for 1150 PRO Series

Brands by name

Popular brands

Pit Boss 1150 PRO Series, User Manual

Search results

Summary of Contents for 1150 PRO Series

Reviews:

Related manuals for 1150 PRO Series

Brands by name

Popular brands