Page 11 of 18
11 Safety Devices Operation
NOTE
: The motor has an overheating protection device built in.
It will automatically switch off power to the motor if it overheats. e.g. from
blocked nozzles, full dust Canister or uncleaned blocked filters.
If this happens, turn off the vacuum and unplug from power socket, clean
blockage and / or filters and allow to rest for at least 60 minutes which should
be enough time for the motor to cool down.
Important
: If the over-temperature device activates and turns the motor off,
and you do not switch off and unplug the appliance from the power point, the
motor will restart automatically after it has cooled down enough to reset the
safety device.
NOTE
: The vacuum cleaner has a Vacuum Suction Relief Valve built into the
lid of the dust canister.
NEVER BLOCK THIS OPENING
.
12 Blockage Indicator
The vacuum cleaner has a blockage light indicator built in so that if the
nozzle becomes blocked, the dust Canister is too full or the filters are
blocked, the red light will illuminate.
Should the light come on, immediately turn power off to the vacuum cleaner
and unplug.
Search for the problem and rectify. i.e. Unblock the nozzle or hose, empty
the dust canister, clean filters or a combination of these.
Note: If you need to clean the filter, refer to the section “Cleaning Filters” for
instruction.
