Piper Cherokee LANCE, Service Manual

Page: 722 / 854

PIPER CHEROKEE SIX / LANCE SERVICE MANUAL
INTRODUCTION 03/27/08
4A10
8. Identifying Revised Material
A revision to a page is defined as any change to the printed matter that existed previously.
Revisions, additions and deletions are identified by a vertical line (i.e., change bar) along the left-
hand margin of the page opposite only that portion of the printed matter that was changed.
A change bar in the left-hand margin opposite the footer (i.e. - chapter/section/subject, page number
and date), indicates that the text was unchanged but the material was relocated to a different page
(07/15/06 and later).
Example.
NOTE: Change bars are not used in the title pages. Likewise, all change bars are removed when a
publication is completely revised (i.e. - reissued).
9. Indexing
A Section Index Guide, below, will assist the user in locating desired information. In addition, each
Section begins with an individual Table of Contents.
10. Warnings, Cautions and Notes
These adjuncts to the text are used to highlight or emphasize important points when necessary. Warnings
call attention to use of materials, processes, methods, procedures or limits which must be followed
precisely to avoid injury or death to persons.
Cautions call attention to methods and procedures which
must be followed to avoid damage to equipment. Notes call attention to methods which make the job
easier. Warnings and Cautions are located directly above and Notes directly beneath the text and in line
with the paragraphs to which they apply.
11. Accident/Incident Reporting
To improve our Service and Reliability system and aid in Piper’s compliance with FAR 21.3, knowledge
of all incidents and/or accidents must be reported to Piper immediately. To expedite and assist in
reporting all incidents and accidents, Piper Form 420-01 has been created. See Service Letter 1041 for
latest revision. This procedure is to be used by all Dealers, Service Centers and Repair Facilities.