Piper Aircraft Corporation Cherokee 140 PA-28-140, Service Manual

Page: 700 / 1024

PIPER CHEROKEE SERVICE MANUAL
01/31/08 III - INSPECTION
3J5
(3) SPINNER/BULKHEAD 25 HOUR INSPECTION.
In PA-28R-180s S/N’s 28R-30001 thru 28R-31266, less 28R-31072; and
in PA-28R-200s S/N’s 28R-35001 thru 28R-35713, less 28R-35699, 28R-35701, 28R-35703,
28R-35706, 28R-35707, 28R-35708, and 28R-35710; for airplanes which have not installed
Piper Kit No. 760-410V per Piper Service Bulletin No. 309,
each 25 hours time-in-service
inspect the spinner and spinner bulkhead as follows:
NOTE: Installation of Piper Kit No. 760-410V or removal of the spinner and spinner bulkhead
entirely relieve this inspection requirement.
(a) Remove spinner and inspect for cracks in the areas shown in Figure 3-3, Sketches A or B,
as appropriate.
(b) Inspect the spinner bulkhead for cracks in the area of the nut plates and attachment points
as shown in Figure 3-3, Sketches A or B, as appropriate.
(c) If no cracks are noted, spinner and bulkhead can be reinstalled and a log book entry made
indicating completion of this inspection.
(d) If cracks are noted, spinner and/or bulkhead must be removed from service.
Figure 3-3. Spinner and Spinner Bulkhead Inspection