Pioneer XV-DVR9H Operating Instructions Manual Download Page 38

Page: 38 / 142

Playback

Frame advance/frame reverse

You can advance or back up video on a DVD disc or the
HDD frame-by-frame. With Video CD/Super VCDs, you
can only use frame advance.

During playback, press

PAUSE.

Press

to back up or advance one frame.

• Hold down

for continuous frame reverse/

frame advance.

To resume normal playback, press

PLAY.

Note

• The picture quality when using frame reverse is not

as good as frame advance.

• Depending on the disc, normal playback may

automatically resume when a new chapter is reached
on a DVD disc.

The Play Mode menu

The Play Mode menu gives you access to search
functions, repeat and program play functions.

Important

• You can’t use the Play Mode features with Video CD/

Super VCDs playing in PBC mode, or while a DVD
disc menu is being displayed. For other restrictions,
see the following sections.

With the input function set to HDD or DVD, press

PLAY MODE to display the Play Mode menu screen.

• You can also access the Play Mode menu from the

Home Menu (press

HOME MENU

Use the

///

(cursor buttons) and ENTER

to navigate.

• To exit the Play Mode menu, press

HOME MENU

PLAY MODE

DVD

HDD

Video CD

Super VCD

PLAY

STEP/SLOW

PAUSE

ALL

TOP MENU

ST +

ST –

TUNE +

TUNE –

DVD MENU

HOME
MENU

PLAY MODE

HDD

DVD

ENTER

CLEAR

PLAY

NEXT

Play Mode

Search Mode
A-B Repeat
Repeat
Program

Time Search
Title Search
Chapter Search

PT-RW_UK.book 38 ページ２００４年７月２６日　月曜日　午後３時４１分

Summary of Contents for XV-DVR9H















































































































































Search results

Summary of Contents for XV-DVR9H

Reviews:

Related manuals for XV-DVR9H

Brands by name

Popular brands

Pioneer XV-DVR9H, Operating Instructions Manual

Search results

Summary of Contents for XV-DVR9H

Reviews:

Related manuals for XV-DVR9H

Brands by name

Popular brands