XV-DV232
74
1
2
4
1
2
3
4
C
D
F
A
B
E
7.1.12 DISASSEMBLY
1
Remove the bonnet case by removing the nine screws.
2
Press the
STANDBY/ON button to turn on the power.
3
Press the
0
OPEN/CLOSE button to open the tray.
4
Remove the tray cap Assy.
5
Set the test disc.
6
Press the
0
OPEN/CLOSE button to close the tray.
(Test disc is clamped.)
7
Press the
STANDBY/ON button to turn off the power.
8
Pull out the Power cord.
Bonnet Case, Tray Cap Assy
1
3
6
5
4
Tray cap Assy
Screwdriver (small)
Screwdriver (small)
05 LOADER Assy
Tray open
Slit
Test disc
Tray
How to open the tray when the power cannot be on
Insert a screwdriver (small) into the slit located at the bottom of
the unit, and slide the projection of the drive cam in the 05
LOADER Assy in the direction of the arrow, as indicated in the
photo. If the tray pops out a little, fully pull it out by hand.
Diagnosis of PCB's
Note 1:
Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2:
Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
7
2
Drive cam
Projection
6
3
Bottom view
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
