Disc playback
06
20
En
Chapter 6:
Disc playback
Playing discs or files
1
Press
STANDBY/ON to turn the power on.
The selected input is displayed on the front panel display.
• When playing discs or files, turn the TV on and switch TV
input before starting.
• You can change the screen display language of the unit
(
Display settings
on page 35).
2
Press DVD/CD on the remote control or
INPUT repeatedly on the main unit to select
DVD/CD input.
Please wait until you see the “
NO
DISC
“.
When a disc is already on the disc tray, press
OPEN/CLOSE
to eject the disc.
3
Press
OPEN/CLOSE to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press
OPEN/CLOSE to close the disc tray.
6
Press
to start playback.
CAUTION
• Do not place two discs in one disc tray.
• Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
• Do not push the disc tray whilst it is moving.
• If the power fails whilst the tray is open, wait until the
power is restored.
• Be sure to place 8 cm disc in the middle of the disc tray.
Note
• Due to the structure of the disc information, it takes longer
to read the disc has written by many files than a normal CD
(approximately 20 to 90 seconds).
• When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
• Rewritable multi-session discs with unfinished writing, can
still be played.
• If TV or radio interference occurs during DVD/CD
operation, move the unit away from the TV or radio.
Tip
• When no operation has done in DVD/CD mode and the
audio file is not played for more than 30 minutes, the
power will automatically turn off.
X-HM31DAB_VXE8_En.book 20 ページ ２０１３年４月２４日 水曜日 午後５時８分
