5
Chapter
5
36
58
7
4
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose one
according to your speaker environment or the source.
While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
•
The listening mode is shown on the display on the front
panel.
Important
•
The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the
AUTO
SURROUND
feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
•
Press
AUTO/DIRECT
repeatedly until
AUTO SURROUND
shows briefly in the display (it will then show the decoding
or playback format). Check the digital format indicators in
the display to see how the source is being processed.
Note
•
Stereo surround (matrix) formats are decoded accordingly
using
NEO:6 CINEMA
or
DOLBY PLIIx MUSIC
(VSX-S510
only) (see
Listening in surround sound
below
for more on
these decoding formats).
•
When listening to the
ADAPTER
input, the
S.R AIR
feature
is selected automatically (see
Using the Advanced surround
on page 37
for more on this).
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
•
If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select
STEREO ALC
(Auto Level Control stereo
mode), this unit equalizes playback sound levels if each sound
level varies with the music source recorded in a portable
audio player.
When you select
STEREO
, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby Digital
and DTS multichannel sources are downmixed to stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
Explanatory notes
No: No connected / Yes: Connected / Two: Two speakers are
connected / –: Whether connected or no
a.
If surround back channel processing (
page 38
) is switched off,
or the surround back speakers are set to
NO
,
DOLBY PLIIx
becomes
DOLBY PLII
(5.1 channel sound).
b.
You can also adjust the
C.WIDTH
,
DIMEN.
, and
PNRM.
effect
(see
Setting the Audio options
on page 40
).
c.
You can also adjust the
C.IMG
effect (see
Setting the Audio
options
on page 40
).
d.
The audio is heard with your surround settings and you can still
use the Midnight, Loudness, Phase Control, Sound Retriever
and Tone functions.
e.
VSX-S510 only
Note
•
In modes that give 6.1 channel sound, the same signal is
heard from both surround back speakers (VSX-S510 only).
AUTO/
DIRECT
AUTO SURROUND/
STREAM DIRECT
ALC/
STANDARD
ALC/STANDARD SURR
Type of surround modes Suitable sources
Two channel sources
STEREO ALC
See above.
DOLBY PLIIx MOVIE
a, e
Movie
DOLBY PLII MOVIE
DOLBY PLIIx MUSIC
a, b, e
Music
DOLBY PLII MUSIC
b
DOLBY PLIIx GAME
a, e
Video games
DOLBY PLII GAME
NEO:6 CINEMA
c
Movie
NEO:6 MUSIC
c
Music
DOLBY PRO LOGIC
Old movies
STEREO
d
See above.
Multichannel sources
STEREO ALC
See above.
DOLBY PLIIx MOVIE
e
Movie
DOLBY PLIIx MUSIC
b, e
Music
DOLBY DIGITAL EX
e
Movie/Music
DTS-ES
e
Movie/Music
DTS NEO:6
e
Movie/Music
STEREO
d
See above.
