Pioneer VSX-LX504 Instruction Manual Download

Page: 100 / 203

100

≫

≫

≫

≫

≫

≫

Playing back files on a PC and NAS (Music Server)

Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported.

•

The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media

Player 11 or 12, or NASes

supporting the home network function. When using Windows Media

Player 11 or 12, you need to make the settings beforehand. Note that with PCs, only music files

registered in the library of Windows Media

Player can be played.

Windows Media

Player settings

On Windows Media

Player 11

Turn on your PC, and start Windows Media

Player 11.

2. In the "Library" menu, select "Media Sharing" to display a dialog box.

3. Select the "Share my media" check box, and then click "OK" to display the

compatible devices.

Select this unit, and then click "Allow".

• When it is clicked, the corresponding icon is checked.

Click "OK" to close the dialog.

•

Depending on the version of Windows Media

Player, the names of items to

select may differ from the above description.

On Windows Media

Player 12

Turn on your PC, and start Windows Media

Player 12.

2. In the "Stream" menu, select "Turn on media streaming" to display a dialog

box.

• If the media streaming is already turned on, select "More streaming

options..." in the "Stream" menu to display the list of playback devices in the

network, and then go to step 4.

Click "Turn on media streaming" to display the list of playback devices in the

network.

Select this unit in "Media streaming options" and check that it is set to "Allow".

Click "OK" to close the dialog.

•

Depending on the version of Windows Media

Player, the names of items to

select may differ from the above description.

❏

Playing Back (

p101

)

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands