Pioneer VSX-934 Instruction Manual Download Page 89

Page: 89 / 153

≫

≫

≫

≫

≫

≫

Listening Mode Effects

Updating of listening modes

Listening modes such as DTS Virtual:X, Atoms 2.0 and DSur 2.0 are

added when the firmware is updated after purchase or the firmware is switched

in the product production process. For details of firmware update, see "Additional

Function (Firmware Update)" (

In alphabetical order

Action

Mode suitable for movies with a lot of action scenes.

AdvancedGame

Mode suitable for game content.

Classical

Suitable for classical or operatic music. This mode emphasizes the surround

channels in order to widen the sound image, and simulates the natural

reverberation of a large hall.

Atmos

(Firmware version before supporting

Atmos 2.0, etc.)

Selectable at the time of inputting Dolby Atmos audio format when surround back

speakers or height speakers are connected. This mode faithfully reproduces the

stereophonic sound design recorded in the Dolby Atmos audio format.

Unlike existing surround systems, Dolby Atmos does not rely on channels, but

rather enables the accurate placement of sound objects that have independent

motion in a 3D space with even greater clarity. Dolby Atmos is an optional

audio format for Blu-ray Discs and achieves a more stereophonic sound field by

introducing a sound field above the listener.

•

To enable transfer of this audio format, connect via an HDMI cable and set the

audio output on the player to Bitstream output.

Atmos

(Firmware version supporting Atmos 2.0, etc.)

Since this mode calculates the positional data of audio recorded in Dolby Atmos

audio in real-time and outputs it from appropriate speakers, you can enjoy the

natural and stereophonic sound field of Dolby Atmos with any speaker layout

including connection of only front speakers. Also, the Dolby Atmos sound design

can be reproduced more faithfully by connecting surround back speakers or

height speakers. You can select this mode when inputting the Dolby Amos audio

format.

Unlike existing surround systems, Dolby Atmos does not rely on channels, but

rather enables the accurate placement of sound objects that have independent

motion in a 3D space with even greater clarity. Dolby Atmos is an optional

audio format for Blu-ray Discs and achieves a more stereophonic sound field by

introducing a sound field above the listener.
According to the speaker layout, the following listening modes are displayed.

–

Atmos 2.0/2.1

: When only front speakers are installed

–

Atmos 3.0/3.1

: When front speakers and center speaker are installed

–

Atmos 4.0/4.1

: When front speakers and surround speakers are installed

–

Atmos 5.0/5.1

: When front speakers, center speaker and surround

speakers are installed

–

Atmos 6.0/6.1

: When front speakers, surround speakers and surround

back speakers are installed

–

Atmos 7.0/7.1

: When front speakers, center speaker, surround speakers

and surround back speakers are installed

–

Atmos 2.0.2/2.1.2

: When front speakers and height speakers are installed

–

Atmos 3.0.2/3.1.2

: When front speakers, center speaker and height

speakers are installed

–

Atmos

: Selectable in the "4.1.2 ch" or "5.1.2 ch" setting with surround

speakers and height speakers installed.

•

To enable transfer of this audio format, connect via an HDMI cable and set the

audio output on the player to Bitstream output.

•

When "Speaker Virtualizer" (

p110

) is set to "Off" (Default: On), modes

other than Atmos cannot be selected.

Summary of Contents for VSX-934


























































































































































Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands

Pioneer VSX-934, Instruction Manual

Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands