111
≫
≫
≫
≫
≫
≫
Volume
Change the Volume settings.
Setting Item
Default Value
Setting Details
Mute Level
-∞ dB
Set the volume lowered from the listening volume
when muting is on. Select a value from "-∞ dB",
"-40 dB" and "-20 dB".
Volume Limit
Off
Set the maximum value to prevent the volume
from becoming too loud. Select a value from "Off",
"-32 dB" to "+17 dB".
Power On Level
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level before
entering standby mode), "-∞ dB", and "-81.5 dB" to
"+18.0 dB".
•
You cannot set a higher value than that of
"Volume Limit".
Headphone Level 0.0 dB
Adjust the output level of headphones. Select a
value between "-12.0 dB" and "+12.0 dB".
Source
Input Volume Absorber
Adjust the volume level when there are differences in volume level among
multiple devices connected to this unit. Select the input selector to make the
setting.
Setting Item
Default Value
Setting Details
Input Volume
Absorber
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB".
Set a negative value if the volume of the target
device is larger than the others and a positive
value if smaller. To check the audio, play back the
connected device.
•
This function does not work in Zone 2.
