Using the tuner
07
53
En
English
Français
Deutsch
Nederlands
Italiano
Español
1
Tune to a station you want to memorize.
See
Listening to the radio
on page 52 for more
on this.
2
Press TUNER EDIT.
The display shows
PRESET
, then a blinking
MEM
and station preset.
3
Press PRESET
/
to select the station
preset you want.
You can also use the number buttons.
4
Press ENTER.
After pressing
ENTER
, the preset number stop
blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do
this. See
Saving station
p
resets
on page 52 if
you haven’t done this already.
•
Press PRESET
/
to select the station
preset you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
Naming preset stations
For easier identification, you can name all of
your preset stations.
1
Choose the station preset you want to
name.
See
Listening to station
p
resets
above for how
to do this.
2
Press TUNER EDIT twice.
The cursor at the first character position is
blinking on the display.
3
Input the name you want.
Choose a name up to eight characters long.
• Use the
PRESET
/
buttons to select
character position.
• Use the
TUNE
/
buttons to select
characters.
• The name is stored when
ENTER
is
pressed.
Tip
• To erase a station name, follow steps 1 and
2, and press
ENTER
while the display is
blank. Press
TUNER EDIT
while the display
is blank, to keep the previous name.
• Once you have named a station preset,
Press
DISP
to show the name. When you
want to return to the frequency display,
press
DISP
several times to show the
frequency.
VSX-920_UCSMXCN_En.book 53 ページ ２０１０年１月２１日 木曜日 午前９時４３分
