Pioneer VSX-917-K Operating Instructions Manual Download Page 69

Page: 69 / 74

Additional information

English

Français

Deutsch

Nederlands

Italiano

Español

SIRIUS radio messages

Resetting the main unit

Use this procedure to reset all the receiver’s
settings to the factory default. Use the front
panel controls to do this.

Switch the receiver into standby.

While holding down the TONE button,

press and hold the



STANDBY/ON button

for about three seconds.

When you see RESET? appear in the

display, press ENTER.
OK?

shows in the display.

Press SETUP to confirm.

appears in the display to indicate that the

receiver has been reset to the factory settings.

Switching the speaker
impedance

We recommend using speakers of 8

Ω

with

this system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6

Ω

impedance rating.

•

With the receiver in standby, press



STANDBY/ON while holding down the
SPEAKERS button.

Each time you do this, you switch between the
impedance settings:

•

SP 6 OHM

– Use this setting if your

speakers are rated at 6

Ω

•

SP 8 OHM

– Use this setting if your

speakers are rated at 8

Ω

or more.

Symptom

Cause

Action

Antenna Error

Antenna is not properly connected.

Check that the antenna cable is
attached securely.

Check Sirius Tuner

SIRIUS Connect tuner is not properly connected Check that the 8 pin mini DIN cable

and AC Adapter are attached securely.

Acquiring Signal

The SIRIUS signal is too weak at the current
location.

n/a

Subscription Updating

Unit is updating subscription.

Wait until the encryption code has
been updated.

Updating Channels

Unit is updating channels.

Wait until the encryption code has
been updated.

Invalid Channel

Selected channel is not available/does not exist. Select another channel.

VSX_917.book.fm Page 69 Thursday, December 7, 2006 4:40 PM

Summary of Contents for VSX-917-K











































































Search results

Summary of Contents for VSX-917-K

Reviews:

Related manuals for VSX-917-K

Brands by name

Popular brands

Pioneer VSX-917-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-917-K

Reviews:

Related manuals for VSX-917-K

Brands by name

Popular brands