Using the tuner
07
45
En
English
Français
Deutsch
Nederlands
Italiano
Español
memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations
each. When saving an FM frequency, the
MPX
setting (see previous page) is also stored.
1
1
Tune to a station you want to memorize.
See
Listening to the radio
on the previous page
for more on this.
2
Press T.EDIT (TUNER EDIT).
The display shows
ST. MEMORY
, then a
blinking memory class.
3
Press CLASS to select one of the three
classes then press ST
/
to select the
station preset you want.
You can also use the number buttons or the
MULTI JOG
dial (front panel) to select a station
preset.
4
Press ENTER.
After pressing
ENTER
, the preset class and
number stop blinking and the receiver stores
the station.
Naming station presets
For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See
Listening to station presets
below for how
to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows
ST. NAME
, then a blinking
cursor at the first character position.
3
Input the name you want.
Choose a name up to four characters long.
• Use the
MULTI JOG
dial (front panel) or the
ST
/
buttons (remote) to select
characters.
• Press
ENTER
to confirm a character. If no
character is input, a space is input.
• The name is stored when
ENTER
is
pressed after choosing the fourth
character.
Tip
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset,
you can press
DISP
when listening to a
station to switch the display between
name and frequency.
Listening to station presets
You will need to have some presets stored to
do this. See
Saving station presets
above if you
haven’t done this already.
1
Press FM, then press CLASS to select the
class in which the station is stored.
Press repeatedly to cycle through classes A, B
and C.
2
Press ST
/
to select the station preset
you want.
• You can also use the number buttons on
the remote control to recall the station
preset.
Note
1 If the receiver is left disconnected from the AC power outlet for over a month, the station memories will be lost and will have
to be reprogrammed.
VSX_917.book.fm Page 45 Thursday, December 7, 2006 4:40 PM
