background image

Listening to your system

05

32

En

Using Virtual Surround Back (VSB)

When you’re not using surround back 
speakers, selecting this mode allows you to 
hear a virtual surround back channel through 
your surround speakers. You can choose to 
listen to sources with no surround back 
channel information, or if the material sounds 
better in the format (for example, 5.1) for which 
it was originally encoded, you can have the 
receiver only apply this effect to 6.1 encoded 

sources like Dolby Digital EX or DTS-ES.

1

The table indicates when you will hear the 
virtual surround back channel (

=Sound 

plays through surround speaker(s)). 

Press SB ch (SB ch PROCESSING)  to select 

a virtual surround back channel option.

Each press cycles through the following:

VSB ON

 – Virtual Surround Back is always 

used (for example, on 5.1 encoded 
material) 

VSB AUTO

 – Virtual Surround Back is 

automatically applied to 6.1 encoded 
sources (for example, Dolby Digital EX or 
DTS-ES) 

VSB OFF

 – Virtual Surround Back mode is 

switched off

a Excluding WMA9 Pro format
b Only applicable when using the Virtual Surround Back mode.
c Not applicable when using the Virtual Surround Back mode.

Using Midnight and Loudness 

The Midnight listening feature allows you to 
hear effective surround sound of movies at low 
volume levels. The effect automatically adjusts 
according to the volume at which you’re 
listening. The Loudness listening feature can 
be used to get good bass and treble from 
music sources at low volume levels.

Press MIDNIGHT (MIDNIGHT/LOUDNESS) 

to switch between MIDNIGHT, LOUDNESS, 
and OFF.

Note

1 • The Virtual Surround Back mode is not effective when using headphones, the Stream Direct, Stereo, Front Stage Surround 
Advance mode. It is also unavailable if the surround speaker is set to 

NO

 in 

Speaker Setting

 on page 41 (however, the surround 

back

 speaker 

must

 be set to 

NO

). 

• Depending on the input signal and the Listening Mode, the Virtual Surround Back mode may not be effective.

Type of source

SBch 

Processing /

Virtual SB 

mode

Standard

Advanced 

surround

Multichannel 

sources

Stereo sources

2

 

Pro Logic II x

2

 

Pro Logic

Neo:6

Dolby Digital EX/DTS-ES/
WMA9 Pro encoded 
multichannel sources with 
6.1ch surround

ON

a

AUTO

a

Dolby Digital/DTS/WMA9 Pro 
encoded multichannel 
sources

ON

a

AUTO

a

Dolby Digital/DTS/WMA9 Pro 
encoded stereo source; other 
digital stereo source

ON

a

,

b

a

AUTO

c

a

Analog 2-channel (stereo) 
sources

ON

b

AUTO

c

VSX_917.book.fm  Page 32  Thursday, December 7, 2006  4:40 PM

Summary of Contents for VSX-917-K











































































Reviews: