Pioneer VSX-830-K, Operating Instructions Manual, Page: 45 / 141

45
Connecting your equipment (In case of VSX-830)
04
Connecting other audio components
This receiver has both digital and analog inputs, allowing you to connect audio components for playback.
When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see
also
The Input Setup menu on page 59 ).
(TV)
(CD)
1
1
DIGITAL IN
/MHL BD 5
1 5 -
4 3 2 1
(OUTPUT 5 V
0.9 A MAX)
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
ARC CONTROL
(DVD) (SAT/CBL)
HDMI IN OUT ASSIGNABLE
/MHL BD 5
1 5 -
4 3 2 1
(OUTPUT 5 V
0.9 A MAX)
ARC CONTROL
(DVD) (SAT/CBL)
HDMI IN OUT
(TV)
(CD)
1
1
DIGITAL IN
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
DIGITAL OUT
COAXIAL OPTICAL
Select one
CD player, etc.
! If you use an optical digital audio cable, you’ll need to tell the receiver which digital input you connected the
player to (see The Input Setup menu on page 59 ).
! When using an analogue connection, connect to the
AUDIO IN
terminal of the
DVD
or
SAT/CBL
, and set the
input to DVD or SAT/CBL . (Do not connect other equipment to the HDMI terminal of the DVD or SAT/CBL .)
Connecting the subwoofer
SUBWOOFER
PRE OUT
1
2
AUDIO OUT
SUBWOOFER
PRE OUT
1
2
AUDIO OUT
ANALOG
INPUT Powered
subwoofer 1
ANALOG
INPUT
Powered
subwoofer 2
! If you’re not using a subwoofer, change the front speaker setting (see Speaker Setting on page 103 ) to
LARGE .
! If you have two subwoofers, the second subwoofer can be connected to the
SUBWOOFER 2
terminal.
Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction. In this
case, the same sound is output from the two subwoofers.
Connecting AM/FM antennas
Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality,
connect external antennas (see
Connecting external antennas on page 46 ).
FM UNBAL
75
AM LOOP
ANTENNA
1
3
a b c
4
5
2