manualshive.com logo in svg

Pioneer VSX-830-K, Operating Instructions Manual, Page: 127 / 141

Share
Download
Pioneer VSX-830-K Operating Instructions Manual Download Page 127

127

Additional information

15

Surround sound formats

Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and 
terrestrial broadcasts, and video cassettes.

Dolby

The Dolby technologies are explained below. See http://www.dolby.com for more detailed information.

In case of VSX-930

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, and the double-D sym-
bol are trademarks of Dolby Laboratories.

In case of VSX-830

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of 
Dolby Laboratories.

DTS

The DTS technologies are explained below. See http://www.dts.com for more detailed information.

In case of VSX-930

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, 
the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio is a trademark of 
DTS, Inc. 

©

 DTS, Inc. All Rights Reserved.

In case of VSX-830

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, 
the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. 

©

 DTS, Inc. All Rights Reserved.

Auto Surround, ALC and Stream Direct with different input signal 

formats

The following charts show what you will hear with different input signal formats, depending on the Stream Direct 
mode (see 

Using Stream Direct

 on 

page  71 

) you have selected.

Stereo (2 channel) signal formats

In case of VSX-930

Input signal format

Auto Surround / PURE DIRECT / DIRECT

ALC

Rendering Mode : 

OBJECT

Rendering Mode : 

LEGACY

Dolby: 2.0 Surround

Dolby Surround

Dolby Digital

Dolby Digital Plus

Dolby Surround

Dolby Digital Plus

Dolby Digital Plus

Dolby TrueHD

Dolby Surround

Dolby TrueHD

Dolby TrueHD

DTS Surround

Neo:6 CINEMA

DTS

Other stereo sources

Stereo playback

Stereo playback

Analog sources

As above

/ANALOG DIRECT (stereo)

<a>

As above

PCM sources

Stereo playback

As above

DVD-A sources

As above

As above

SACD sources

As above

/DSD DIRECT (stereo)

<b>

As above

a  ANALOG DIRECT is available when the listening mode set to 

PURE DIRECT

.

b  DSD DIRECT is available when the listening mode set to 

PURE DIRECT

.

In case of VSX-830

Input signal format

Auto Surround / 

DIRECT

ALC

PURE DIRECT

Dolby: 2.0 Surround

  

Pro Logic II MOVIE

  

Pro Logic II MOVIE

  

Pro Logic II MOVIE

DTS Surround

Neo:6 CINEMA

DTS

Neo:6 CINEMA

Other stereo sources

Stereo playback

Stereo playback

Stereo playback

Analog sources

As above

As above

ANALOG DIRECT (stereo)

PCM sources

As above

As above

Stereo playback

DVD-A sources

As above

As above

As above

SACD sources

As above

As above

As above

　

　

　

　

Summary of Contents for VSX-830-K














































































































































Reviews:

No comments