62
VSX-709RDS, VSX-609RDS
=
LED display
This display flashes when a command is sent from the
remote control to the receiver. It also flashes at other times,
for example when teaching the receiver preset codes.
~
/– buttons
Use to adjust the amount of effect in different DSP sound
modes or advanced listening modes.
!
2 3 5∞
( FQ +/–, ST +/–) & ENTER buttons
Use these arrow buttons when setting up your surround
sound system (see pages 15 – 20). These buttons are also
used to control DVD menus/options and for deck 1 of a
double cassette deck player. The FQ +/– buttons can be
used to find radio frequencies. The ST +/– buttons can be
used to select the stations of memorized radio frequencies.
@
TOP MENU button
In DVD mode this button brings you to the top or most
fundamental menu.
#
C/– buttons (
4
/DISPLAY,
¢
/RF
ATT)
Use to select the stations of memorized radio frequencies.
Also use to skip tracks backward or forward on CDs, DVDs,
etc. Also use to display the RDS information (DISPLAY) and
use to lower the input level of a radio signal (RF ATT).
$
MUTING button
Use to mute the sound or restore the sound if it has been
muted.
%
MASTER /– buttons
Use to set the overall listening volume.
^
REMOTE SETUP button
Use this button when setting up the remote control to control
other components.
4
TV CONTROL buttons
The following four sets of buttons are dedicated TV controls.
FUNC button
Use to select the TV function.
button
Use to turn on the power of the TV.
CH +/– buttons
Use to change channels on your TV.
VOL +/– buttons
Use to adjust the volume on your TV.
5
MENU button
Use to access different menus associated with your DVD
player.
6
SOURCE button
Use to turn on/off other components connected to the
receiver.
7
The following buttons are both controls for
other components (like a DVD player) and
dedicated tuner controls. The tuner controls are
explained here. You can use them after you
have pushed the TUNER MULTI CONTROL
button.
CLASS button
Use to switch between the three banks (classes) of station
memories.
MPX button
Use to switch between auto stereo and mono reception of
FM broadcasts. If the signal is weak then switching to
MONO will improve the sound quality. Also, this is the
pause button for CDs, tapes, DVDs, etc.
BAND button
Use to switch between the AM and FM band when in
TUNER mode.
0
RECEIVER button
This switches the receiver between STANDBY mode and
power ON.
-
FL DIMMER button
Use this button to make the fluorescent display (FL) dimmer
or brighter. There are three brightness settings as well as an
off setting.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
