Pioneer VSX-532, Operating Instructions Manual

Page: 12 / 39

Connecting your equipment
2
2
12
2
33
4
Connecting a TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped
component (Blu-ray Disc player, etc.), you can connect it to
this receiver using a commercially available HDMI cable.
• The following connection/setting is required to listen to the
sound of the TV over this receiver.
-
If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with
audio cables (as shown).
-
If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via
the HDMI terminal, so there is no need to connect an
audio cable. In this case, set ARC at HDMI Setup to ON
(see The HDMI Setup menu on page 32 ).
-
Please refer to the TV’s operation manual for directions
on connections and setup for the TV.
Important
• When the ARC function is ON and the receiver is
connected to a compatible TV with an HDMI cable, and
you switch the input of the TV to composite, the input of the
receiver may automatically switch to
TV . If this happens,
switch the receiver’s input back to the original input, or turn
OFF the ARC function (see The HDMI Setup menu on
page 32 ).
Note
• In order to listen to the audio from the TV that is connected
to this receiver using an analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 31 ).
HDMI IN
DIGITAL AUDIO OUT
OPTICAL
R L
ANALOG AUDIO OUT
HDMI OUT HDMI OUT HDMI OUT
HDMI OUT
Select one
HDMI/DVI-compatible TV
Blu-ray Disc /DVD
player
Set-top box Game console
HDMI/DVI-compatible components
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound over
the receiver.
OSD can only be
output from HDMI.
Streaming media player
VSX-532_CDC_En.book 12 ページ ２０１７年１月１２日 木曜日 午後３時１２分