background image

Controls and displays

1

1

7

2

35

4

Loading the batteries

The batteries included with the unit are to check initial 
operations; they may not last over a long period. We 
recommend using alkaline batteries that have a longer life.

WARNING

Do not use or store batteries in direct sunlight or other 
excessively hot place, such as inside a car or near a 
heater. This can cause batteries to leak, overheat, explode 
or catch fire. It can also reduce the life or performance of 
batteries.

CAUTION

Incorrect use of batteries may result in such hazards as 
leakage and bursting. Observe the following precautions:

-

Never use new and old batteries together.

-

Insert the plus and minus sides of the batteries properly 
according to the marks in the battery case.

-

Batteries with the same shape may have different 
voltages. Do not use different batteries together.

-

When disposing of used batteries, please comply with 
governmental regulations or environmental public 
institution’s rules that apply in your country/area.

-

When inserting the batteries, make sure not to damage 
the springs on the battery’s (–) terminals. This can cause 
batteries to leak or overheat.

Operating range of remote control

The remote control may not work properly if:

There are obstacles between the remote control and the 
receiver’s remote sensor.

Direct sunlight or fluorescent light is shining onto the 
remote sensor.

The receiver is located near a device that is emitting 
infrared rays.

The receiver is operated simultaneously with another 
infrared remote control unit.

30°

7 m

30°

Summary of Contents for VSX-531D










































Reviews: