Controls and displays
1
1
9
4
62
7
Remote control
•
The following buttons are not used with this receiver:
-
PTY
,
1
SLEEP
Press to change the amount of time before the receiver
switches into standby (
30 min – 60 min – 90 min – Off
). You
can check the remaining sleep time at any time by pressing
SLEEP
once.
2
RECEIVER
Switches the receiver between standby and on.
3
Switches the remote to control the receiver (used to select the
white commands above the number buttons (
MIDNIGHT
,
etc)). Also use this button to set up surround sound (
page 49
)
or Audio parameters (
page 37
).
4
INPUT SELECT
Use to select the input source (
page 25
).
5
Input function buttons
Use to select the input source to this receiver (
page 25
). This
will enable you to control other components with the remote
control (
page 57
).
6
Listening mode buttons
AUTO/DIRECT
– Switches between Auto surround mode
(
page 34
) and Stream Direct playback (
page 35
).
ALC/STANDARD SURR
(VSX-1023 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II,
2
Pro Logic IIx,
2
Pro Logic IIz and
NEO:6, and the Auto level control stereo mode (
page 34
).
ALC/STANDARD SURR
(VSX-823 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II and NEO:6, and the Auto level control
stereo mode (
page 34
).
ADV SURR
– Switches between the various surround
modes (
page 35
).
7
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (
BD
,
DVD
,
etc.).
Press
first to access:
AUDIO PARAMETER
– Use to access the Audio options
(
page 37
).
HOME MENU
– Press to access the Home Menu
(
page 49
).
RETURN
– Confirm and exit the current menu screen.
Press
BD
,
DVD
or
DVR/BDR
first to access:
TOP MENU
– Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU
– Displays the HOME MENU screen.
RETURN
– Confirm and exit the current menu screen.
MENU
– Displays the TOOLS menu of Blu-ray Disc player.
Press
TUNER
first to access:
TOOLS
– Memorizes stations for recall (
page 33
), also
used to change the name (
page 33
).
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (
page 33
).
Press
iPod/USB
first to access:
iPod CTRL
– Switches between the iPod controls and the
receiver controls (
page 28
).
8
///
(
TUNE
/
,
PRESET
/
),
ENTER
Use the arrow buttons when setting up your surround sound
system (
page 49
). Also used to control Blu-ray Disc/DVD
menus/options.
Use
TUNE
/
can be used to find radio frequencies and
PRESET
/
can be used to select preset radio stations
(
page 33
).
9
Component control buttons
The main buttons (
,
, etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (
BD
,
DVD
and
CD
). These buttons also function as described
below.
Press
first to access:
BASS +/–
,
TRE +/–
– Use to adjust Bass or Treble.
• These controls are disabled when the listening mode is
set to
DIRECT
or
PURE DIRECT
.
• When the front speaker is set at
SMALL
in the Speaker
Setting (or automatically via the Auto MCACC setup)
and the X.Over is set above 100 Hz, the subwoofer
channel level will be adjusted by pressing
BASS +/–
(
page 50
).
SLEEP
INPUT
1
4
7
RECEIVER
ENTER
2
5
8
DISP
CLR
3
6
9
0
ENTER
CH
CH
MUTE
RETURN
AUDIO
PARAMETER
MENU
HOME
MENU
RECEIVER
RECEIVER
SOURCE
TOOLS
BAND
iPod CTRL
PTY
TOP
MENU
TUNE
TUNE
P
R
E
S
E
T
P
R
E
S
E
T
SHIFT
1
2
11
12
13
14
15
16
3
4
5
6
7
8
9
10
SHIFT
RECEIVER
RECEIVER
RECEIVER
VSX-1023_823_UCSMXCN_En.book 9 ページ ２０１２年１２月１８日 火曜日 午前１１時７分
