Pioneer VSX-1023-K Operating Instructions Manual Download

Page: 48 / 68

Playback with NETWORK features

About playable file formats

The NETWORK feature of this receiver supports the following

file formats. Note that some file formats are not available for

playback although they are listed as playable file formats.

Also, the compatibility of file formats varies depending on the

type of server. Check with your server to ensure the

compatibility of file formats supported by your server.

•

Internet radio playback may be affected by the Internet

communications environment, and in this case playback

may not be possible even with the file formats listed here.

•

With WAV, FLAC, AIFF and Apple Lossless files, when

music files with the same format, sampling frequency,

quantization bit number and number of channels are

played successively, they are played with no gap.
-

Gapless playback is not possible when the format is

being converted (transcoded) by the server.

Gapless playback is not possible in the DMR mode.

Music files

MPEG Layer-3 audio decoding technology licensed from

Fraunhofer IIS and Thomson multimedia.

Files encoded using Windows Media Codec 9 may be playable

but some parts of the specification are not supported;

specifically, Pro, Lossless, Voice.

Uncompressed FLAC files are not supported. Pioneer does not

guarantee playback.

Extension

Stream

MP3 (MPEG-1 Audio Layer 3)

.mp3

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz

Quantization bitrate

16 bit

Channel

2 ch

Bitrate

8 kbps to 320 kbps

VBR/CBR

Supported/Supported

WAV (LPCM)

.wav

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz,

176.4 kHz, 192 kHz

Quantization bitrate

16 bit, 24 bit

Channel

2 ch

WMA (WMA2/7/8/9)

.wma

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz

Quantization bitrate

16 bit

Channel

2 ch

Bitrate

5 kbps to 320 kbps

VBR/CBR

Supported/Supported

AAC (MPEG-4 AAC LC, MPEG-4 HE AAC (aacPlus v1/2))

.m4a
.aac
.3gp
.3g2

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz

Quantization bitrate

16 bit

Channel

2 ch

Bitrate

16 kbps to 320 kbps

VBR/CBR

Supported/Supported

FLAC

.flac

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz,

176.4 kHz, 192 kHz

Quantization bitrate

16 bit, 24 bit

Channel

2 ch

AIFF

.aif
.aiff

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz

Quantization bitrate

16 bit, 24 bit

Channel

2 ch

Apple Lossless

.m4
.mp4

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz

Quantization bitrate

16 bit, 24 bit

Channel

2 ch

VSX-1023_823_UCSMXCN_En.book 48 ページ２０１２年１２月１８日　火曜日　午前１１時７分

Summary of Contents for VSX-1023-K





































































Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands

Pioneer VSX-1023-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands