Pioneer VSX-1023-K Operating Instructions Manual Download

Page: 27 / 68

Basic playback

Playing an iPod

This receiver has the

iPod iPhone iPad USB

terminal that will

allow you to control playback of audio content from your iPod

using the controls of this receiver.

Important

•

Pioneer cannot under any circumstances accept

responsibility for any direct or indirect loss arising from any

inconvenience or loss of recorded material resulting from

the iPod failure.

•

About one minute is required between turning the power

on and completion of startup.

•

USB works with iPhone 5, iPhone 4S, iPhone 4, iPhone

3GS, iPhone 3G, iPhone, iPad (3rd and 4th generation),

iPad 2, iPad, iPad mini, iPod touch (1st through 5th

generation) and iPod nano (1st through 7th generation).

Audio only for iPhone 5, iPad (3rd and 4th generation), iPad

mini, iPod touch 5th generation and iPod nano (6th and 7th

generation). Howerver, some of the functions may be

restricted for some models.

•

This receiver has been developed and tested for the

software version of iPod/iPhone/iPad indicated on the

website of Pioneer (http://pioneer.jp/homeav/support/ios/

na/).

•

Installing software versions other than indicated on the

website of Pioneer to your iPod/iPhone/iPad may result in

incompatibility with this receiver.

•

iPod, iPhone and iPad are licensed for reproduction of non-

copyrighted materials or materials the user is legally

permitted to reproduce.

•

Features such as the equalizer cannot be controlled using

this receiver, and we recommend switching the equalizer

off before connecting.

•

Make sure the receiver is in standby when disconnecting

the iPod/iPhone/iPad.

Switch on the receiver and your TV.

See

Connecting an iPod

on page 21

Switch the TV input so that it connects to the receiver.

•

Switch the TV input to the input that connects this

receiver to the TV through the corresponding HDMI

cable.

Tip

•

In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.

DVD

TUNER

ADAPTER

SAT/CBL

DVD SAT/CBL

DVD

SAT/CBL

GAME DVR/BDR

NETWORK

DVD SAT/CBL

RECEIVER

SIGNAL

SEL

RECEIVER

SIGNAL

SEL

RECEIVER

SIGNAL

SEL

RECEIVER

SIGNAL

SEL

Audio

Video/Audio (HDMI)

Video

Other than

input

(

input)

ANALOG IN1

audio input terminal is

assigned to

under factory settings. If

you want to change this to

input,

please change the settings in the Input

Assign menu (

page 51

VSX-823

VSX-1023_823_UCSMXCN_En.book 27 ページ２０１２年１２月１８日　火曜日　午前１１時７分

Summary of Contents for VSX-1023-K





































































Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands

Pioneer VSX-1023-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands