Pioneer VSX-1023-K Operating Instructions Manual Download

Page: 21 / 68

Connecting your equipment

Connecting an iPod

This receiver has a dedicated iPod/iPhone/iPad terminals that

will allow you to control playback of audio content from your

iPod using the controls of this receiver.

Note

•

An iPod/iPhone/iPad can be connected to the receiver. For

details on supported models and versions of the respective

products, see

Playing an iPod

on page 27



Switch the receiver into standby, and then use the iPod

cable to connect your iPod to the iPod/iPhone/iPad
terminals on the front panel of this receiver.

•

For the cable connection, also refer to the operating

instructions for your iPod.

•

When connecting an iPhone to this unit, keep the iPhone

at least 20 cm away from this unit. If the iPhoneis kept

closer to this unit and a telephone call is received by the

iPhone, noise may be output from this device.

•

iPod recharging occurs whenever an iPod is connected to

this unit. (Recharging is enabled only when the unit’s

power is turned on.)

•

For instructions on playing the iPod, see

Playing an iPod

page 27

Use a dedicated cable to enjoy iPod video

If an iPod is connected using a dedicated iPod connection

cable (sold separately), then video from the iPod can also be

enjoyed on a TV that is connected to the receiver.

•

The iPod cable is not included with this receiver. The

optional iPod cable from Pioneer is sold separately under

the part number

L308102013030-IL

. Contact the Pioneer

Customer Support division for more information on

obtaining an optional iPod cable.

•

iPhone5, iPad 4th generation, iPad mini, iPod touch 5th

generation and iPod nano 7th generation cannot be

connected using a separately sold iPod cable.

Note

•

Due to linked operation of the HDMI control function, if a

supported TV and receiver are connected using a HDMI

cable and the TV input is changed during iPod input, the

receiver may automatically also change to TV input. If this

happens, please either change the receiver’s input back to

iPod, or turn OFF the HDMI control function (see

HDMI

Setup

on page 55

Connecting a USB device

It is possible to play audio and photo files by connecting USB

devices to this receiver.



Switch the receiver into standby then connect your USB

device to the iPod/iPhone/iPad terminals on the front panel
of this receiver.

•

This receiver does not support a USB hub.

•

For instructions on playing the USB device, see

Playing a

USB device

on page 28

iPod/iPhone/iPad

USB cable that

comes with the iPod

iPod/iPhone/iPad

iPod cable

USB mass

storage device

VSX-1023_823_UCSMXCN_En.book 21 ページ２０１２年１２月１８日　火曜日　午前１１時７分

Summary of Contents for VSX-1023-K





































































Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands

Pioneer VSX-1023-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-1023-K

Reviews:

Related manuals for VSX-1023-K

Brands by name

Popular brands