Pioneer T1000-23345, Update Instructions And Operation Manual

Page: 26 / 192

21 Touch [Yes].
Update starts.
22 Wait until the upgrade process is com-
plete.
A message will appear after the update is
complete.
23 Touch [OK].
The message disappears, and the map screen
returns.
24 Eject the upgrade microSD card #2
(2 GB).
Update is completed.
Updating the Bluetooth
wireless technology software
p
Customers updating the Bluetooth firm-
ware of AVIC-F10BT for the first time should
refer to
Updating the Bluetooth wireless
technology software (for AVIC-F10BT) on
page 24.
p
If you have already applied the update
using the upgrade microSD card before
and the current Bluetooth firmware version
is 3.32, there is no need to apply this firm-
ware update.
Access the Pioneer website to check your
phone
’
s compatibility. If your phone is on the
list and you wish to update, manually update
the Bluetooth firmware after the automatic up-
grade is finished.
http://www.pioneer.eu
CAUTION
!
Be sure to upgrade your navigation system
first.
!
Be careful to follow the update procedure cor-
rectly. If you make a mistake, Bluetooth wire-
less technology functions will become
unavailable.
p
Consult your authorised dealer if you are
unable to use Bluetooth wireless technol-
ogy functions.
!
Be sure to complete the Bluetooth firmware
update procedure without interruption.
p
Registered phones that are listed on the
“
Connection List
”
screen are cleared by
the Bluetooth firmware update.
Engb
26
Chapter
05
Instructions for upgrading