Pioneer SX-S30, Owner'S Manual

Page: 36 / 169

35
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
0
The setting cannot be changed when "TUNER", "NET", "USB" or "BT AUDIO" input is
selected.
Hardware
∫ HDMI
Fixed PCM Select whether to fix input signals to PCM (except multi-channel
PCM) when you have selected "HDMI", "COAXIAL", or
"OPTICAL" in the "Audio Select" setting. Set this item to "On" if
noise is produced or truncation occurs at the beginning of a track
when playing PCM sources. Select "Off (Default Value)"
normally.
0
Changing "Audio Select" changes the setting to "Off".
HDMI CEC Setting to "On" enables the input selection link and other link
functions with HDMI connected CEC compliant device.
"On": Use this function
"Off (Default Value)": Do not use this function
When changing this setting, turn off and then on again the power
of all connected components.
0
Depending on the TV set, a link may need to be configured on
the TV.
0
Setting to "On" and closing the on-screen menu displays the
name of the CEC-compatible components and "CEC On" on
the display of this unit.
0
Power consumption in standby mode may increase if "On" is
set. (Depending on the TV status, the unit will enter the
normal standby mode.)
0
If you operate MASTER VOLUME dial on the unit when this
setting is "On" and audio is output from the TV speakers,
audio will be output also from the speakers connected to the
unit. If you want to output from only either of them, change the
unit or TV settings, or reduce the volume of the unit.
0
If abnormal operation occurs when you set the setting to "On",
set it to "Off".
0
When connecting a non-CEC compatible component, or when
you are not sure whether it is compatible, set the setting to
"Off".