Pioneer Super Tuner IIID DEH-P6200BT, Operation Manual

Page: 21 / 116

S/W update (updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
!
Never turn the unit off while the software is being
updated.
1
Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Other Functions
Using an AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1
or
AUX2
. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary device using a stereo
mini plug cable
%
Insert the stereo mini plug into the
AUX input jack.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1 .
AUX2 source:
When connecting an auxiliary device using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to an auxiliary device
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
This auxiliary device is automatically set to
AUX2
.
#
This type of connection can only be made if
the auxiliary device has RCA outputs.
Selecting AUX as the source
%
Press SRC/OFF to select AUX as the
source.
#
AUX cannot be selected unless the auxiliary
setting is turned on. For more details, refer to
AUX1 / AUX2 (auxiliary input setting) on the pre-
vious page.
Using the PGM button
You can operate the preprogrammed functions
for each source by using
PGM .
%
Press PGM to turn pause on when se-
lecting the following sources:
!
CD
–
CD player
!
USB / USB-iPod
–
USB/iPod
#
To turn pause off, press
PGM
again.
%
Press PGM and hold to turn BSM on
when selecting tuner or
“
HD Radio
”
as the
source.
Press PGM and hold until the BSM turns on.
#
To cancel the storage process, press
PGM
again.
En
21
English
Section
02
Operating this unit