The playback speed of audiobook can be changed.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select your favorite setting.
!
Faster
–
Playback at a speed faster than nor-
mal
!
Normal
–
Playback at normal speed
!
Slower
–
Playback at a speed slower than nor-
mal
3
Press
M.C.
to confirm the selection.
S.Rtrv
(sound retriever)
!
Refer to
Notes
!
Operation is complete even if the menu is can-
celled before being confirmed.
!
Switching the control mode to
iPod
pauses
song playback. Operate the iPod to resume
playback.
!
The following functions are still accessible
from the unit even if the control mode is set to
iPod
.
—
Volume
—
Fast forward/reverse
—
Track up/down
—
Pausing
—
Switching the text information
!
When the control mode is set to
iPod
, opera-
tions are limited as follows:
—
Only
CTRL
(control mode),
Pause
(pause)
and
S.Rtrv
(sound retriever) functions are
available.
—
The browse function cannot be operated
from this unit.
Bluetooth Telephone
Connection menu operation
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1
Press and hold PHONE/
/CONNECT to
display the connection menu.
#
You cannot operate this step during a call.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device list
(connecting or disconnecting a cellular
phone from the device list)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the name of a device you want
to connect/disconnect.
3
Press
M.C.
to connect/disconnect the selected
cellular phone.
If the connection is established,
*
is indicated on
the device name.
Delete device
(deleting a cellular phone from the de-
vice list)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the name of a device you want
to delete.
!
Press and hold
M.C.
to switch the BD address
and device name.
3
Press
M.C.
to display
Delete YES
.
4
Press
M.C.
to delete a cellular phone information
from the device list.
!
While this function is in use, do not turn off the
engine.
Add device
(connecting a new cellular phone)
1
Press
M.C.
to start searching.
!
To cancel, press
M.C.
while searching.
2
Turn
M.C.
to select a device from the device list.
!
If the desired device is not displayed, select
Search again
.
3
Press and hold
M.C.
to switch the BD address
and device name.
4
Press
M.C.
to connect the selected cellular
phone.
!
To complete the connection, check the device
name (
DEH-P6200BT
) and enter the link code
on your cellular phone.
!
PIN code is set to
0000
as the default. You
can change this code. Refer to
!
If five devices are already paired,
Memory full
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
En
16
Section
02
Operating this unit
Summary of Contents for Super Tuner IIID DEH-P6200BT
Page 115: ...Es 115 Español ...
