Playing a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2
Track number indicator
Shows the track currently playing.
1 Press OPEN to open the front panel.
CD loading slot appears.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT
button
#
You can eject a CD by pressing
EJECT
.
#
To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To performfast forward or reverse,
press and hold
c
or
d
.
6 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting the disc
again.
!
If the built-in CD player does not operate prop-
erly, an error message such as
ERROR-11
may be displayed. Refer to
Understanding
built-in CD player error messages
on page 34.
!
When a CD TEXT disc is inserted, the disc and
track titles begin to scroll to the left auto-
matically.
Built-in CD Player
En
12
Section
05
HHHHHHHHHHHHHH
