Pioneer SGX-CA600 User Manual Download

Page: 319 / 335

319

If the firmware update fails, a message appears on the screen.

Press and hold the [Power] button for 2 seconds or more to turn off the

power.

When updating via Wi-Fi

The Wi-Fi function of the device needs to be enabled in advance.

Even if you have already set Wi-Fi, press the [Confirm] button to go to the Wi-Fi

setting screen if a connection via Wi-Fi is not possible.

Wi-Fi Settings

Device Settings

Check the battery status and configure the settings of the device.

Press the [Menu] button.

Use the [←]/[→] buttons to select [Settings] and then press

the [Confirm] button.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands