Pioneer SGX-CA600 User Manual Download Page 255

Page: 255 / 335

255

Note

When using the optional ANT+speed sensor or ANT+speed & cadence

sensor, please set the tire circumference.

The tire circumference can be changed in [Menu] - [Bike] - [Wheel

Circumference].

It is set to 2,096 mm by default.

To connect to the Bluetooth heart rate sensor, configuration of the

Bluetooth setting on the device is required.

■

Adding a Sensor

A search for all nearby connectable sensors is performed and the found sensors

are listed as connection candidates.

Press the [Menu] button.

Use the [←]/[→] buttons to select [Bike] and then press the

[Confirm] button.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands