Pioneer SGX-CA600 User Manual Download

Page: 182 / 335

182

Analyzing Log Data

Displaying Log Data

The past log data or past lap log data can be analyzed on the device.

Note

Saved log data is displayed automatically after it is saved.

Press the [Menu] button.

Use the [←]/[→] buttons to select [History] and then press

the [Confirm] button.

Use the [←]/[→] buttons to select [Log Data] and then press

the [Confirm] button.

When the data is separated by one or more laps during logging, the

current log data is selected.

The most recent log data is selected before logging starts or after log-

ging is saved.

Summary of Contents for SGX-CA600
















































































































































































































































































































































Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands

Pioneer SGX-CA600, User Manual

Search results

Summary of Contents for SGX-CA600

Reviews:

Related manuals for SGX-CA600

Brands by name

Popular brands