Pioneer SGX-CA600, User Manual

Page: 159 / 335

159
Using the Live Partner Function
This function allows you to wirelessly connect two cyclocomputers
that support the Live Partner function and then set one as the coach
(receives measurement values from the other party) and the other as
the partner (sends measurement values to the other party) to receive
and send measurement data in real time.
This allows the coach to set a pace suitable for the conditions
because the coach can ride while viewing the partner's power,
cadence, and other measurement values.
To use the Live Partner function, configuration of the Bluetooth set -
ting on the device is required.
Coach and Partner Configuration Patterns
A maximum of three devices (CH1 to CH3) can be connected both on the receiving
side and on the sending side.
When you will be the coach and you wish to select three partners, set [CH1] to
partner 1, [CH2] to partner 2, and [CH3] to partner 3.
Then, get the partners to set you as the coach for one of [CH1] to [CH3].
Example: One coach and multiple partners
The coach can ride while viewing the riding state of partners 1, 2, and 3.
Coach
Partner1 Partner2 Partner3
Example: Multiple coaches and one partner
Coaches 1, 2, and 3 can ride while viewing the riding state of partner 1.
Coach3
Partner1
Coach2 Coach1
Example: Two riders who are both a coach and partner
The riders can ride while viewing each other's riding state.
Coach2 and
Partner2
Coach1 and
Partner 1
■ Coach and Partner Communication Distance
The maximum communication distance is approximately 30 m.