20
EN
W
or
kout
W
or
kout
Basic Workout Flow
This device is designed to log a variety of sensor data as well as GPS location data during your workout. In this device, the
beginning of the training to the end of the training is called “ workout”.
Basic Flow of the Workout
[Start]
Lap1
Lap2
Lap3
Lap3
Lap4
Lap5
[Lap]
[Lap]
[Stop]
[Start]
[Lap]
[Lap]
[Stop]
[Lap]
(2 sec.)
Workout
Timer
Resetting
1
Press the [START/STOP] button to start
logging.
[Timer Started] is displayed.
2
Press the [START/STOP] button to stop logging.
[Timer Stopped] is displayed.
You can start and stop logging at any time while the device
•
is turned on except while the device is connected to a PC or
during setting initialization.
A logging operation can continue for up to 360,000 points.
•
If the [LAP] button is pressed during logging, a lap is
•
recorded. Up to 300 laps can be recorded during a single
logging operation.
Logging Interval
■
Under initial factory default settings, the device is configured
to save various types of data at 1 second intervals when
logging.
You can change settings so the logging interval is to be
•
adjusted in accordance with bike riding speed.
The logging interval becomes shorter as bike riding speed
increases and longer as riding speed decreases.
Ü
Logging (page 45)
Logging Start/Stop
