Pioneer SC-LX901 Basic Manual Download

Page: 80 / 117

> Specifications

> Settings

> Listening Modes

> Playback Function

> Basic Manual

Troubleshooting

Appendix

Network/Bluetooth

Make settings related to network connections and BLUETOOTH .

Operation

Use the on-screen displays (OSD) that appear on the TV to make the settings.

Press on the remote controller to display the Home screen, select Network/Bluetooth

with the cursors on the remote controller, then press ENTER.

Select the item with the cursor / / / buttons of the remote controller and press

ENTER to confirm your selection.

Use the cursors / to change the default values.

•

To return to the previous screen, press .

•

To exit the settings, press .

Network

•

When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting

automatically. ("Enable" is set by default.) To assign fixed IP addresses to each

components, you must set "DHCP" to "Disable" and assign an address to this unit in

"IP Address" as well as set information related to your LAN, such as Subnet Mask and

Gateway.

Setting Item

Default Value

Setting Details

Wi-Fi

Off (Wired)

Connect the unit to network via wireless LAN

router.

"On": Wireless LAN connection

"Off (Wired)": Wired LAN connection

Wi-Fi Setup

You can configure wireless LAN settings by

pressing ENTER when "Start" is displayed.

Wi-Fi Status

The information of the connected access point will

be displayed.

"SSID": SSID of the connected access point.

"Signal": Signal strength of the connected access

point.

"Status": Status of the connected access point.

MAC Address

This is the MAC address of this unit.

This value is specific to the component and cannot

be changed.

DHCP

Enable

"Enable": Auto configuration by DHCP

"Disable": Manual configuration without DHCP

•

If selecting "Disable", you must set "IP Address",

"Subnet Mask", "Gateway", and "DNS Server"

manually.

IP Address

0.0.0.0

Displays/Sets the IP address.

Subnet Mask

0.0.0.0

Displays/Sets the subnet mask.

Gateway

0.0.0.0

Displays/Sets the gateway.

DNS Server

0.0.0.0

Displays/Sets the primary DNS server.

Proxy URL

Displays/Sets the proxy server URL.

Proxy Port

8080

Displays/Sets the proxy server port number when

you enter "Proxy URL".

Summary of Contents for SC-LX901






















































































































Search results

Summary of Contents for SC-LX901

Reviews:

Related manuals for SC-LX901

Brands by name

Popular brands

Pioneer SC-LX901, Basic Manual

Search results

Summary of Contents for SC-LX901

Reviews:

Related manuals for SC-LX901

Brands by name

Popular brands