Pioneer SC-LX78 Operating Instructions Manual Download

Page: 62 / 141

Basic playback

Listening to music contents of a

Bluetooth

wireless technology device with

your system

1 Press BT ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 From the

Bluetooth

wireless technology device, perform the operation to connect to the

Bluetooth

ADAPTER.

When the

Bluetooth

ADAPTER is not plugged into the

ADAPTER PORT

No Adapter

will be displayed if

ADAPTER PORT

input is selected.

3 Start playback of music contents stored on the

Bluetooth

wireless technology device.

This receiver’s remote control buttons can be used for basic playback of files stored on

Bluetooth

wireless tech-

nology devices.

Bluetooth

wireless technology device should be compatible with AVRCP profile.

Depending on the

Bluetooth

wireless technology device you use, operation may differ from what is shown in

the remote control buttons.

4 While listening to a source, set the remote control to the receiver operation mode, then
press ADV repeatedly to select SOUND RETRIEVER AIR.

Notes

The

Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of
their respective owners.

With this receiver, when an iPod is connected or disconnected while the music of a

Bluetooth

wireless technol-

ogy device is playing, the connection with the

Bluetooth

wireless technology device may be canceled.

The

SOUND RETRIEVER AIR

listening mode can only be selected when the

ADAPTER PORT

input.

Summary of Contents for SC-LX78














































































































































Search results

Summary of Contents for SC-LX78

Reviews:

Related manuals for SC-LX78

Brands by name

Popular brands

Pioneer SC-LX78, Operating Instructions Manual

Search results

Summary of Contents for SC-LX78

Reviews:

Related manuals for SC-LX78

Brands by name

Popular brands