background image

125

Additional information

14

Surround sound formats

Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and 
terrestrial broadcasts, and video cassettes.

Dolby

The Dolby technologies are explained below. See http://www.dolby.com for more detailed information.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.

DTS

The DTS technologies are explained below. See http://www.dts.com for more detailed information.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, 
the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio is a trademark of 
DTS, Inc. 

©

 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S. Patent No’s: 7,003,467; 7,283,634; 5,956,674; 5,974,380; 5,978,762; 
6,487,535; 6,226,616; 7,212,872; 7,272,567; 7,668,723; 7,392,195; 7,930,184; 7,333,929 and 7,548,853. DTS, the 
Symbol, and DTS and the Symbol together are registered trademarks & DTS Neo:X is a trademark of DTS, Inc. 

©

2012 

DTS, Inc. All Rights Reserved.

SABRE DAC

TM

SABRE DAC

TM

 and the logo are trademarks of ESS Technology, Inc.

About HDMI

HDMI (High-Definition Multimedia Interface) is a digital transfer standard for receiving video and audio data with 
a single cable. It is an adaptation of DVI (Digital Visual Interface), a display connection technology, for use in 
home audio devices. This interface standard is for next-generation TVs providing High-bandwidth Digital Content 
Protection (HDCP).

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing, LLC in the United States and other countries.

HTC Connect

HTC, HTC Connect and the HTC Connect logo are trademarks of HTC Corporation.

 

 

 

 

Summary of Contents for SC-LX78














































































































































Reviews: