Pioneer SC-LX58 Operating Instructions Manual Download Page 43

Page: 43 / 140

Connecting your equipment

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.

HDMI 5 INPUT

AUTO/ALC/

DIRECT

STATUS

BAND

TUNER EDIT

iPod iPhone

DIRECT CONTROL

5V 1 A

USB cable included with the iPod

iPod/iPhone

Tip

An iPod/iPhone can be connected to the receiver. For details on supported models and versions of the respec-

tive products, see

Playing an iPod

page 55

Switch the receiver into standby, and then use the iPod cable to connect your iPod to the

iPod/iPhone terminal on the front panel of this receiver.

For the cable connection, also refer to the operating instructions for your iPod.

When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is

kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.

iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the

unit’s power is turned on.)

For instructions on playing the iPod, see

Playing an iPod

page 55

Connecting a USB device

It is possible to play audio and photo files by connecting USB devices to this receiver.

HDMI 5 INPUT

AUTO/ALC/

DIRECT

STATUS

BAND

TUNER EDIT

iPod iPhone

DIRECT CONTROL

5V 1 A

USB mass
storage device

Switch the receiver into standby then connect your USB device to the USB terminal on the

front panel of this receiver.

This receiver does not support a USB hub.

For instructions on playing the USB device, see

Playing a USB device

page 56

Summary of Contents for SC-LX58













































































































































Search results

Summary of Contents for SC-LX58

Reviews:

Related manuals for SC-LX58

Brands by name

Popular brands

Pioneer SC-LX58, Operating Instructions Manual

Search results

Summary of Contents for SC-LX58

Reviews:

Related manuals for SC-LX58

Brands by name

Popular brands