42
Connecting your equipment
03
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
!
The settings must be changed at
ZONE Setup
in order to use the
HDZONE
function (
).
!
To use the
HDZONE
functions, set
Control
or
Control Mode
in
HDMI Setup
to
OFF
. For details, see
!
You must select
HDZONE
in
) to use this setup.
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
(Single)
A
SURROUND BACK
R
L
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
R
Sub zone (
HDZONE
)
Main zone
L
(Single)
A
SURROUND BACK
R
L
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
HDMI IN
2
1
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN (10/100)
LAN
(10/100)
WAN
3
2
1
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
Computer
NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
on
.
LAN terminal specifications
!
LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
!
Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
!
When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.