2
English
Connection and initial setup
following the instructions in the
“Wiring Navi” in AVNavigator
(Connection to the nework is required for
the initial setup.)
Connect by following the
instructions in the “Wiring Navi”
in AVNavigator
(For when the receiver is not to be
connected to a network.)
Connection and initial setup by
referring to this Quick Start Guide
It is unnecessary to read this guide for explanations;
will be explained in the “Wiring Navi”
and
in the “Operation Guide”.
will be conducted in the “Wiring Navi”,
so move on to
in this guide’
after “Wiring Navi”.
Move on to
in this guide.
Connection and initial setup
Enjoy easy multichannel playback with this unit in 3 steps:
Connecting up
→
Initial setup
→
Basic playback
.
Convenient with easy connection and initial setup upon following the instructions displayed on-screen by installing
AVNavigator (in the included CD-ROM). Start connecting by choosing one method from among the following in accordance
with your play environment.
AVNavigator
AVNavigator
Quick Start
Guide
1
Load the included CD-ROM into your computer’s CD drive.
• The CD-ROM’s top menu screen appears.
• AVNavigator can be used with Microsoft
®
Windows
®
XP/Vista/7.
• The supported browser is Microsoft Internet Explorer 8 or 9.
• Adobe
®
Flash
®
Player 10 must be installed to use some of the functions in
AVNavigator. For detail, see http://www.adobe.com/downloads/.
2
Click ‘Install AVNavigator’ from the CD-ROM top menu.
Using AVNavigator
3
Follow the instructions on the screen to install.
When “Finish” is selected, installation is completed.
4
Remove the included CD-ROM from the computer’s CD drive.
5
Click [AVNavigator] on the desktop to launch AVNavigator.
• AVNavigator is launched and Wiring Navi starts up.
• Depending on the network or security settings on the computer on which
AVNavigator is to be installed, AVNavigator’s functions may not work
properly.
