35
03
Connecting your equipment
Connecting optional
Bluetooth
ADAPTER
When the
Bluetooth
®
ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with
Bluetooth
wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music
wirelessly.
!
The
Bluetooth
wireless technology enabled device must support A2DP profiles.
!
Pioneer does not guarantee proper connection and operation of this unit with all
Bluetooth
wireless technology
enabled devices.
!
The Air Jam function cannot be used with the AS-BT100.
(OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT
(OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT
Bluetooth
® ADAPTER
Important
!
Do not move the receiver with the
Bluetooth
ADAPTER connected. Doing so could cause damage or faulty
contact.
%
Switch the receiver into standby and connect
Bluetooth
ADAPTER to the ADAPTER PORT.
!
For instructions on playing the
Bluetooth
wireless technology device, see
Pairing the Bluetooth ADAPTER and
Bluetooth wireless technology device
on
page 49
.
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
HDMI 5 INPUT/
MHL (5V 0.9 A)
AUTO/ALC/
DIRECT
ECO
BAND
TUNER EDIT
iPod iPhone iPad
DIRECT CONTROL
with USB
5V 2.1 A
iPod/iPhone/iPad
USB cable included with the iPod
Tip
!
An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the
respective products, see
Playing an iPod
on
page 45
.
%
Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone/iPad terminal on the front panel of this receiver.
!
For the cable connection, also refer to the operating instructions for your iPod.
!
When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is
kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.
!
iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit’s power is turned on.)
!
For instructions on playing the iPod, see
Playing an iPod
on
page 45
.
Use a dedicated cable to enjoy iPod video
If an iPod is connected using a dedicated iPod connection cable (sold separately), then video from the iPod can
also be enjoyed on a TV that is connected to the receiver.
!
The iPod cable is not included with this receiver. The optional iPod cable from Pioneer is sold separately under
the part number ADE7136.
Contact the Pioneer Customer Support division for more information on obtaining an optional iPod cable.
!
iPhone5, iPad 4th generation, iPad mini, iPod touch 5th generation and iPod nano 7th generation cannot be
connected using a separately sold iPod cable.
HDMI 5 INPUT/
MHL (5V 0.9 A)
AUTO/ALC/
DIRECT
ECO
BAND
TUNER EDIT
iPod iPhone iPad
DIRECT CONTROL
with USB
5V 2.1 A
iPod/iPhone/iPad
iPod cable
