Additional information
12
96
En
Error Messages
Audio cannot be
received.
•The radio wave reception is variable depending on locations due to
the effects of obstacles and reflecting objects. Try changing the
location of the receiver a little.
•The transmitter and receiver are designed and sold as a pair, and
they identify each other in communication. This means that
communication is not available between separately purchased
transmitter and receiver.
Horizontal stripe noise
interference on a TV set
near the transmitter.
•Is there a piece of A/V equipment with an antenna near the
transmitter? If so, move the transmitter away from the antenna input
terminal of the AV equipment.
Problem
Remedy
Message
Description
Child Lock
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See
Child Lock
on page 85 for
more on switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited
because the Recording Mode is on (see
Recording mode
on page 91).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited
because headphones are connected.
DVD-AUDIO
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is DVD-Audio.
SACD
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is a Super Audio CD.
96K Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited
because there is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited
because the sound is muted (see
Muting the sound
on page 49).
Exit
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
XV-HDT530.book 96 ページ ２００３年５月１０日 土曜日 午後４時６分
