Additional information
12
91
En
Recording mode
The Recording mode allows you to make
analog recordings from the
LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including
SURROUND
,
ADVANCED
,
AUTO
,
SYSTEM SETUP
)
become inactive. The display will briefly blink
RecMode On
if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1
Press SOUND MODE.
2
Use the
/
(cursor left/right)
buttons to select ‘Rec Mode?’.
3
Press ENTER.
4
Use the
/
(cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
• When Recording mode is on, a stereo
downmix of multichannel DVD-Audio and
SACD sources is output from both the
speakers and the analog audio jacks.
However, note that with some
multichannel DVD-Audio sources, only
the front right and left channels are
output from the analog jacks. When
switched off. the multichannel source is
played through the speakers, but only the
front right and left channels are output
from the analog audio jacks.
• When Recording mode is on, you won’t be
able to hear the subwoofer channel with
SACD sources.
XV-HDT530.book 91 ページ ２００３年５月１０日 土曜日 午後４時６分
