56
RMX-1000
1
2
3
4
A
B
C
D
E
F
1
2
3
4
6.2 CALIBRATION MODE
[How to Enter Calibration Mode]
W
hile simultaneously holding the FX SOURCE I
N
PUT, FX SOURCE X-PAD, and S
N
ARE buttons pressed, turn the unit on.
[Overview]
This mode is for compensating for variations in individual RELEASE FX levers and for storing the compensation results in
nonvolatile memory.
[Operating elements to be used for adjustment]
7-segment indicator
"CAL": During calibration of the lever
"E
N
d":
W
riting to nonvolatile memory completed
"Err": An error generated
SCENE FX indicator
Blue LEDs lit:
W
riting to nonvolatile memory completed
Red LEDs flashing: An error generated
HOLD button
For starting calibration
HPF ECHO, CRUSH ECHO, and REVERB DOWN buttons
W
hen these buttons are simultaneously pressed, writing to nonvolatile memory is performed.
RELEASE FX indicator
The LEDs are called LED 1, LED 2, and LED 3 from the top to the bottom.
Flashing at intervals of 500 ms:
W
aiting for determination of A/D conversion values
Flashing at intervals of 250 ms: During data writing to nonvolatile memory
NOISE button
For determining A/D conversion values
BPF ECHO, NOISE, REVERBUP buttons
After calibration is completed, these buttons light in accordance with
changing of the lever positions, to indicate the results of calibration.
