Pioneer PRS-D800, Owner'S Manual

Page: 9 / 40

About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2
W
to 8
W
for stereo connection, or 4
W
to 8
W
for
monaural and other bridge connection.
Subwoofer
Speaker channel Power
Two-channel output
Nominal input:
Min. 125 W
One-channel output
Nominal input:
Min. 300 W
Other than subwoofer
Speaker channel Power
Two-channel output
MAX input:
Min. 250 W
One-channel output
MAX input:
Min. 600 W
Connecting the speakers
and RCA input
The RCA input mode can be two-channel
(stereo) or one-channel (mono).
The figures below show examples of connec-
tion. Connect the speaker leads and RCA
input accordingly to suit the mode.
Two-channel input (Stereo)
When connecting two speakers (Left
and right)
5
4 3
6
1
2
1
Speaker output (Right)
2
Speaker output (Left)
3
RCA input jack A (Left)
4
RCA input jack B (Right)
5
RCA cable (sold separately)
6
From car stereo (RCA output)
Two-channel input (Stereo)
When connecting a speaker (Bridge)
4
3 2
5
1
1
Speaker output
2
RCA input jack A
3
RCA input jack B
4
RCA cable (sold separately)
5
From car stereo (RCA output)
One-channel input (Mono)
When connecting two speakers (front
left and rear left)
!
Slide INPUT (input) switch to 1CH position.
!
Audio from RCA input A will be output
from the speakers.
En
9
English
Section
02
Connecting the units