Inserting an SD memory card
%
Insert an SD memory card into the SD
card slot.
Insert it with the contact surface facing to the
left and press the card until it clicks and com-
pletely locks.
p
There is no compatibility for Multi Media
Card (MMC).
p
Compatibility with all SD memory card is
not guaranteed.
p
Optimum performance of this unit may not
be obtained depending on the SD memory
card.
p
Do not insert anything other than SD mem-
ory cards or dummy SD cards into the SD
card slot.
Ejecting an SD memory card
1
Press the SD memory card until it clicks.
The SD memory card is ejected.
2
Pull out the SD memory card.
p
Insert the dummy SD card to keep the SD
card slot free of dust when the SD memory
card is not inserted.
Plugging and unplugging a
USB storage device
CAUTION
!
To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!
If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Plugging in a USB storage device
%
Plug a USB storage device into the USB
connector.
USB connector
USB storage device
p
Compatibility with all USB storage device is
not guaranteed.
Optimum performance of this navigation
system may not be obtained depending on
the USB storage device that is connected.
p
Connection via USB hub is not available.
Unplugging a USB storage device
%
Pull out the USB storage device after
checking that no data is being accessed.
Basic operation
En
15
Chapter
02
Basic
operation