Pioneer PRA-BD11, Service Manual

Page: 45 / 98

PRA-BD11
45
5 6 7 8
5 6
7
8
C
D
F
A
B
E
7.1.5 [PRA-BD12]: HOW TO OPERATION CHECK
3-3. Start up the PRV-LX1 (Product -jig
1
) with the PRA-BD12 connected. Check the three LEDs for checking the power
supply (orange) and six LEDs for checking operations (green).
3-4. Play back the GGV1035 disc on PRV-LX1 (Product -jig
1
) and check (preview or recording) the display on the TV
monitor connected to PRV-LX1 (Product -jig
2
) with PRA-BD11 (product -jig ) to see if video signals are correctly
output. Also check the sound to verify that audio signals are correctly output.
PRV-LX1
(Product -jig
1
)
+
PRA-BD12
PRV-LX1
(Product -jig
2
)
+
PRA-BD11 (Product)
AV Amp.
TV monitor
Speaker
SDI OUT
(BNC cable)
(BNC cable)
AES/EBU OUT
Composite
Audio
3-2. Connect a TV monitor and AV amplifier to the PRV-LX1 (Product -jig
2
), as shown in the figure below, to monitor video
and audio signals.
PRA-BD12
~
Ÿ
1. Equipment necessary for operational checking of the main unit
• PRV-LX1 (Product -jig
1
for checking): The PRA-BD12 is to be mounted.
• PRV-LX1 (Product -jig
2
for checking): The PRA-BD11 (product -jig ) is to be mounted.
• PRA-BD11 (product -jig )
• AV amplifier & Speaker
• GGV1035
(Test disc: DVDT-001)
• DKP3674 (4 pin cable (L))
• DDD1267 ( FFC cable (L))
• BNC - BNC cable: 2 cables
• TV monitor
2. About video and audio signals to be used for operational checking of the main unit
Play back the GGV1035 Test Disc with the PRV-LX1 (Product -jig
1
).
3. Inspection of the main unit
3-1. Mount the PRA-BD12 on the PRV-LX1 (Product -jig
1
) and connect it with the PRV-LX1 (Product -jig
2
) using the
4-pin PH cable: DKP3674 (
~
) and 30-pin FFC cable: DDD1267 (
Ÿ
).