Pioneer PDP-V402 Technical Manual Download Page 1

Page: 1 / 185

Plasma Display:

PDP-V402/V402E

Down converter:

PDA-4003

Tilted cradle:

PDK-4001

Metal fixture for ceiling-hanging type plasma display: PDK-4002

PDK-4003
PDK-4004

PDP bracket:

PDK-4005

Metal fixture for wall-hanging type plasma display:

PDK-4006

Mobile cart:

PDK-5008

Multiple mounting fixture for plasma display:

PDM-4001

Protective filter:

PDA-4002

Speaker system:

PDP-S03-LR

[Installation]

We sell this equipment on the assumption that it

will be installed by a specialist with adequate training.

The equipment must be installed by trained vendors

or by your dealer.

We are not responsible for injuries or damage

resulting from choice of unsuitable installation sites,

problems in assembly and installation, improper

installation, or natural disasters.

Note:

• We are not responsible for damage caused by defective

parts supplied by third parties.

• The performance of the equipment is guaranteed only

when assembly and adjustment are performed as

described herein.

• The specifications and descriptions given in this

technical manual are subject to change without notice.

For safety

In this manual, this symbol indicates important

precautions. Read these precautions carefully.

This manual gives precautions, general information, and examples for installation and handling of the plasma display

and its metal fixtures.

Carefully examine the structure, material, strength, and environmental conditions for the site at which the display is to

be installed before selecting an installation method. If the site is unsatisfactory, venders should not sell or install the

equipment.

TECHNICAL MANUAL

(ver.2.0)

Summary of Contents for PDP-V402


























































































































































































Search results

Summary of Contents for PDP-V402

Reviews:

Related manuals for PDP-V402

Brands by name

Popular brands

Pioneer PDP-V402, Technical Manual

Search results

Summary of Contents for PDP-V402

Reviews:

Related manuals for PDP-V402

Brands by name

Popular brands