PDP-R06G
23
5
6
7
8
5
6
7
8
C
D
F
A
B
E
6. ADJUSTMENT
6.1 POSSIBLE CASES WHERE READJUSTMENT IS REQUIRED
1. At shipment, the unit is adjusted to its best conditions. Normally, it is not necessary to readjust even if an assembly is replaced.
2. Use a stable AC power supply.
When any of the following assemblies is replaced
When any part in the following assemblies is replaced
POWER SUPPLY Unit
No adjustment required
MR MAIN Assy
No adjustment required
Other assemblies
No adjustment required
POWER SUPPLY Unit
The assembly must be replaced as a unit, and no part
replacement is allowed.
No adjustment required.
However, IC4804, IC4806, IC5207, IC6001, IC6003 and
IC6201 must not be replaced. In this case, the assembly
must be replaced as a unit.
MR MAIN Assy
Other assemblies
No adjustment required
