Pioneer PDP-434PU Operating Instructions Manual Download Page 98

Page: 98 / 118

Useful Features

Using the learning function

Slide the

Mode switch

to match the device whose

remote control signal you want to be learned.

Press

EDIT/LEARN

and

at the same time.

•The LED flashes.

Press a button to be learned.
• The LED lights up.
• For the functions that can be learned, see pages

100 to 105.

• When learning is finished, the LED starts

flashing again.

Press

EDIT/LEARN

again to exit the Learn mode.

• To exit the Learn mode halfway, press

EDIT/LEARN

again.

• If the

Mode switch

selection is changed when in the

Learn mode, the Learn mode is cancelled.

• If no operation is performed for more than one

minute, the Learn mode is cancelled.

• It takes about 2 seconds to finish code transmission.

Do not interrupt it halfway. Wait until the LED flashes
again.

• You can reset all learned codes to the factory de-

faults. When not in the Learn mode, press and hold

, and then press

and

at the same time.

PDP5040HD-Eng (97-105)

7/24/03, 2:01 PM

Summary of Contents for PDP-434PU























































































































Search results

Summary of Contents for PDP-434PU

Reviews:

Related manuals for PDP-434PU

Brands by name

Popular brands

Pioneer PDP-434PU, Operating Instructions Manual

Search results

Summary of Contents for PDP-434PU

Reviews:

Related manuals for PDP-434PU

Brands by name

Popular brands